Baby Lock BLDY Service Manual page 174

Application of
Needle-presser module
Disassembly
15
Removal of Lever AB
1. Remove the screw (taptite, bind B M3x8) to remove the lever supporter plate, and then pull out the
lever AB from the lever guide shaft. Remove the retaining ring E2 to remove the lever guide shaft, and
remove the retaining ring E2 from the lever guide shaft.
Retaining rings E2
<Back of upper unit holder assy>
Lever guide shaft
Lever AB
Lever supporter plate
Taptite, Bind B M3X8
Taptite, bind B M3x8
3 - 76