Table of Contents
Advertisement
K-System – Isolated Barriers
Configuration
4
Configuration
Danger!
Explosion hazard from sparking when using operating elements
Using operating elements in a potentially explosive atmosphere can cause sparks
that can ignite the surrounding atmosphere.
Only use operating elements (e. g., switch, slider, button, etc.) in the absence of a potentially
explosive atmosphere.
Caution!
Potential device malfunction from change of device function
Changes in the device function can lead to device malfunction. The function of the device
is no longer guaranteed.
Before transferring the new device function, make sure that the changed device function
does not cause a danger to the device and the plant.
Caution!
Potential device malfunction due to electrostatic discharge
An electrostatic discharge may occur while you are operating the device. This can lead
to malfunction of the device. As a result, the function or safety function of the device
is no longer guaranteed.
•
Ground yourself or provide yourself with an adequate equipotential bonding before
operating the device.
•
Only open the front flap while you are operating the device. Otherwise, keep the front flap
closed.
Configuring the Device
Set the particular operating elements as described in the Configuration section
of the data sheet.
Note
See corresponding datasheets for further information.
35
Advertisement
Table of Contents
