Pepperl+Fuchs KCD2-SCS-Ex2.SP System Manual page 34

K-System – Isolated Barriers
Mounting and Installation
3.2.4 Establishing the Communication via Software
Danger!
Explosion hazard from sparking when plugging or pulling the adapter
Plugging or pulling the adapter in a potentially explosive atmosphere can cause sparks
that can ignite the surrounding atmosphere.
Only plug or pull the adapter in the absence of a potentially explosive atmosphere.
Caution!
Fault in the plant
Changing the device data changes the device function.
Before entering new device data, make sure the plant is not endangered by changing
the device data.
Establishing the Communication via Software
Establish the HART communication via K-ADP-USB adapter and HART multiplexer
on the control side, if available.
Note
See manual HART Multiplexer System KFD*-HM*-16 for further information
for communication via software.
34