Table of Contents
Advertisement
11. DISPLAY RANGE OF VARIOUS PARAMETERS
Set parameters
TIME (minute: second)
Block (file)
Step number (step)
Height (m)
Heart rate (sub / min)
CAL (CALORIE)
(KCAL)
SPM (change)
12. SAFE LOCK FUNCTION
Under any state, the safety lock can be pulled off to stop the machine, and all windows displays --", and
the buzzer sends 3 alarm sounds. At this time, the machine cannot perform any other operation except
shutdown. After the safety lock is reinstalled correctly, the machine will reenter the standby state and wait
for the input instruction.
13. POWER SAVING MODE:
The system has the function of sleep mode. If there is no key command input within 10 minutes under non
running state, the system enters the power saving mode. Automatically the display will close (go black),
you can then press any key to reawaken the system.
14. AUX/ BLUETOOTH / USB/ WIRELESS CHARGING FUNCTION (OPTIONAL):
Aux Audio output
Bluetooth music Connect mobile device to Bluetooth
Bluetooth name SYMK
USB interface Plays audio from the USB flash drive.
Wireless charging used to charge mobile device.
15. SHUT DOWN
You can turn off the stair climber at any time by turning off the power switch, which does not damage the
stair climber.
16. SAFETY CHECKS
1. Check the power supply before exercise. Check whether the safety lock is working.
2. If abnormality occurs during movement, the safety lock can be pulled off and the machine will
quickly stop; and then put the safety lock clockwise, reset and wait for input instruction.
3. If there is any problem with this machine, please contact the place of purchase.
4. During operation, any object entering the infrared sensing area will immediately stop the stair climber.
Initial value
Set initial value
0:00
1
0
0.0
P
0.0
0
Setting range
15:00
5:00 99:00
1
5000
100 9990
10.0
N/A
50.0
10.0 999
N/A
Display range
0:00 - 99:59
1 25
0 - 9999
5.0 999
0.0 - 999
N/A
50 - 200
0.0 - 999
N/A
COMPUTER OPERATION |
1 - 25
0-999
21
Advertisement
Table of Contents
