Operating Instructions - LifeSpan Vertex ST-15 Manual

VI. OPERATING INSTRUCTIONS
1. WINDOW DISPLAY
1. "TIME/STEPS" window: Movement time or number of steps is displayed, and will switch every 5
seconds. When the movement time is displayed, the range is from 0:00 to 99:59. Once it reaches the end
time 99:59 it will stop running and displays "End" and enters the standby state after 5 seconds.
The countdown decreases from the set time to zero, when the reverse time drops to 0:00, the machine
stops running and displays "End", after 5 seconds it will enter into the standby state. When the number
of steps is displayed, the current number of actual moving steps is indicated.
2. "HEIGHT/PROG" window: Displays the height levels or the program sequence number. The motion
height is displayed in ranges from 0.0 999, and the reverse count decreases from the set value to zero.
When the reverse count drops to 0, machine will slow down to a stop and "End" is displayed, after 5
seconds it will enter into the standby state.
Prog: Indicates the current program sequence number when in program setting mode and the current
segment number when custom program setting.
3. "CALORIES" window: Display the calorie value, and counts from range 0.0 999. When the reverse
counting hits 0, the machine will slow to a stop and displays "End" on display. After 5 seconds it will
enter into the standby state.
16 COMPUTER OPERATION |