Table of Contents
Advertisement
Fig. 1
STEP 5
1. As shown in Figure 1, connect the wires on the console (47) with the corresponding on the rear handrail
(4) and the console support column (5) (matched by the same wire number).
2. Tighten the console (47) on the support column (5) with screw (78), then lock the decorative cover
(48) on the console (47) with screw (82).
3. Lock the water bottle holder (49) on the support column (5) from top to bottom, tighten with screw
(78).
ASSEMBLY INSTRUCTIONS |
15
Advertisement
Table of Contents
