Table of Contents
Advertisement
3. QUICK START (MANUAL MODE):
1. Turn on the power switch and correctly attach the magnetic safety lock to the safety lock position
below the panel.
2. Press the "START" start key, the system enters the 3 seconds countdown and a buzzer will sound. The
speed window shows the countdown number, after the 3 seconds countdown, the stair climber starts
running at a speed of 1.0 km (0.6 mi) / hour.
3. After startup, use the SPEED + and SPEED the keys to adjust the speed of the stair climber as needed.
4. OPERATION DURING MOVEMENT:
1. Press "+" key to increase the running speed of the machine station.
2. Press "-" key to reduce the running speed of the machine.
3. Press "Keypad" key to quickly set the machine speed.
4. Press will Stop to stop operation.
5. Press the Start/Pause key will slow down to suspend operation.
6. The heartbeat data is displayed for about 3 seconds when the exerciser holds the heartbeat handle
5. MANUAL MODE:
1. In standby, press Start to start running at 1 speed. The other windows count forward from 0, press gear
+ to change the gear speed.
2. In the non running state, press the "manual / program / custom / time / height / calorie" key to
quickly switch the mode. After switching the mode (excluding manual mode), you can set the relevant
parameter value using "+ / --" key.
3. After the mode setting, select one of the settings and then press the start button, to start the
operation after 3 seconds. Press "+ / --" button to adjust the gear. Press Stop key to stop operation.
6. RUNNING MODE:
1. In non running state, start the machine at 1 speed. Other windows will start counting from 0. Press "+ /
-" or "Keypad" key to change the gear speed.
2. Press "Time" key to enter the countdown time. "Time" window will display "15:00" and flash. Press "+ / -"
or "Keypad" key to set the required Time. Setting the range is 5:00 99:00.
3. Press "Distance" key to enter the Distance countdown, "Dist." window will display "10.0" and flash.
4. Press "+ / --" or "Keypad" key to set the Km, the setting range is: 5.0 999.
5. Press the "Calorie" key to enter the calorie countdown. "Cal" window will display "50.0" and flash.
6. Press "+ / --" or "Keypad" key to set the calories, the calorie setting range is 10.0 999.
7. Select one of the three reverse modes before pressing the start button, and the machine will start
running after 3 seconds. You can change the current running speed through the control button, or stop
the machine.
18
COMPUTER OPERATION |
Advertisement
Table of Contents
