Table of Contents
Advertisement
Operation
packing cycle.
•
The actual vacuum pressure is indicated by the analog vacuum gauge.
PLUG AND PLAY
•
When turning on the machine for the first time:
- Running time of the vacuum pump is pre-set at 30-40 seconds and the sealing time at 2 seconds.
Vacuum is indicated on the analog vacuum gauge.
•
When turning on the machine after that, program P1 will contain the most-recently used settings.
•
The vacuum and sealing times are easily adjusted to match the needs for the application.
OPERATING THE MACHINE WITH ONE-PROGRAM CONTROL SYSTEM
On: turns the machine on:
•
The machine will start up in the most-recently used program.
•
The pump of a machine with a transparent cover will start when the cover is closed.
Off: turns the machine off:
•
When pressing the
after about 4 seconds.
•
When pressing the
•
Closing the cover will initiate the cool-down phase; the machine will complete a number of
vacuum cycles before turning off automatically.
Stop-function:
•
Stops the machine at any point in the packing cycle and aerates the chamber.
Reset-function:
•
While programming, resets the program value to its original setting.
Press the menu button
Stops the current function and initiates the next step in the cycle:
•
By pressing the
to the sealing function.
•
While packing sauce or soup, the package may be sealed as soon as product boiling is
detected.
Entering the desired vacuum time
By pressing the + or – of the vacuum button, the vacuum time can be increased or decreased.
The selected value is confirmed and saved by pressing the menu button
•
Press the
Entering the desired sealing time
•
By pressing the + or – of the sealing button, the sealing time can be increased or decreased.
The selected value is confirmed and saved by pushing the menu button
•
Press the
button once, the
button a second time, the pump will stop immediately.
to return to the home menu.
of the sealing button
:
button to reset the original value.
:
button to reset the original value.
symbol will start blinking and the pump will stop
, the vacuum function stops and the program jumps
8
:
:
Advertisement
Table of Contents
Need help?
Do you have a question about the VP-NL-0004-SN and is the answer not in the manual?
Questions and answers