Maintenance - Omcan VP-NL-0004-SN Instruction Manual

Operation
2. Push the menu button to access the settings menu.
3. All functions for the selected program are indicated at the bottom of the display.
4. Push the button to select the blinking function to be adjusted.
5. Adjust the value of the selected function with the
6. Press the button to reset all functions to their original values.
7. Select the next function with the
8. Press the menu button to save the entered values and to return to the home menu.
TURNING PROGRAM FUNCTIONS ON/OFF
The following functions can be turned ON/OFF for each program P1-P9:
Vacuum plus: on/off, in seconds.
Gassing: on/off, in seconds or in mbar (only with sensor).
Clean cut controlled (CCC) seal: on/off, in seconds.
Soft-air: on/off, in seconds or in mbar (only with sensor).
Multi-cycle: on/off, in number of cycles.
ADjUSTING ON/OFF FUNCTION VALUES
1. Press the menu button to select the settings menu.
2. Use the button to select the blinking function to be adjusted.
3. Press the button to select the desired value.
4. Press the button to reset all functions to their original values.
5. Select the next function with the
6. Push the menu button to store all selected values and to return to the home menu.
TURNING OFF MACHINE
• Follow the same procedure as for the one-program control system.

Maintenance

GENERAL
Regular maintenance prevents equipment malfunctions and prolongs the life of the machine. In addition, it
optimizes sanitary conditions.
• Always have a certified Henkovac dealer carry out repair and maintenance activities.
WARNING
• During maintenance activities, always turn the machine off at the main switch and/or unplug it from the
electrical outlet.
button.
button.
button.
14