Teledyne Linea CL LA-CM-08K08A User Manual page 79

SEM: Set Exposure Mode
Display
Set Exposure Mode
Name
Mnemonic SEM
Argument(s) Mode
Description Set exposure time mode
Notes 




SET: Set Exposure Time
Display Exposure Time
Name
Mnemonic SET
Argument(s) Exposure time
Description Set internal exposure time in nanoseconds – 22.2 ns (2k, 4k, 8k) or 37 ns
resolution (16k).
Notes For 2k, 4k 8k models:
SMM: Set Mirroring Mode
Display Mirroring
Name
Mnemonic SMM
Argument(s) Mode
Description Set mirroring mode
SPF: Pixel Format
Display
Pixel Format
Name
Mnemonic SPF
Argument(s) Selector
Description Set pixel format
Notes 12-bit pixel format is only available with Base or Medium Camera Link
Configurations.
Linea CL Series Camera
In internal mode the exposure time is controlled by the SET command
In external mode the sensor is exposed while CC1 signal is high
External mode is only available when the trigger mode is also
external (STM 1)
SEM 1 overrides internally generated independent exposure times
When CC1 signal falls line is read
4, 000 to 3, 332, 000 [ns]
Line time > ( Exposure time + 1, 000 ns )
For 16k models: Line time > ( Exposure time + 2, 000 ns )
0. Internal ("Timed")
1. External ("Trigger Width" )
0. Off
1. Image is flipped on the horizontal axis
0. 8-bits
2. 12-bits
Appendix B: ASCII Commands  77