Teledyne Linea CL LA-CM-08K08A User Manual page 19

Connect to the camera
1. Start a new Sapera CamExpert application (or equivalent Camera Link compliant interface)
by double clicking the desktop icon created during the software installation.
2. In CamExpert, for Teledyne DALSA frame grabbers, the camera appears below the Board
category.
Check LED Status
If the camera is operating correctly at this point, the diagnostic LED is steady green. If the LED is
red, check the Power-on Status field and refer to Appendix C: Error and Warning Messages.
Software Interface
All the camera features can be controlled through the CamExpert interface. For example, under the
Camera Control menu in the camera window you can control the line rate and exposure times.
Operate the Camera
At this point you will be ready to start operating the camera to acquire images, set camera
functions, and save settings.
Linea CL Series Camera Linea CL Camera Setup  17