Teledyne Linea CL LA-CM-08K08A User Manual page 60

Display Name
Vendor
Model
CCI Version
FPGA Version
Microcode Version
Serial Number
Device User ID
Power-on User Set
Factory
UserSet1
to
UserSet8
User Set Selector
Factory Set
User Set 1
to
User Set 8
Load User Set
Save User Set
Power-on Status
Device Temperature
Refresh Temperature
Input Voltage
Refresh Voltage
LED Color
Good
Blink Green
BIST Error
License Key
58  Appendix A: GenICam Commands
Feature & Values
DeviceVendorName
DeviceModelName
DeviceVersion
DeviceManufacturerInfo
DeviceFirmwareVersion
DeviceID
DeviceUserID
UserSetDefaultSelector
Factory
UserSet1
UserSetSelector
Factory
UserSet1
UserSetLoad
UserSetSave
deviceBISTStatus
DeviceTemperature
refreshTemperature
deviceInputVoltage
refreshVoltage
deviceLEDColor
Green
BlinkGreen
Red
securityUpgrade
Description
Displays the device vendor name. (RO)
Displays the device model name. (RO)
Displays the device version. This tag will also highlight if the
firmware is a beta or custom design. (RO)
This feature provides extended manufacturer information about
the device, such as the firmware design type. (RO)
Displays the currently loaded firmware version number.
Firmware files have a unique number and have the .cbf file
extension. (RO)
Displays the device's factory set camera serial number. (RO)
Feature to store a user-programmable identifier of up to 15
characters. The default factory setting is the camera serial
number. (RW)
Selects the camera configuration set to load and make active on
camera power-up or reset. The camera configuration sets are
stored in camera non-volatile memory. (RW)
Load factory default feature settings.
Select the user defined configuration (UserSet1 to UserSet8) as
the Power-up Configuration.
Selects the camera configuration set to load feature settings
from or save current feature settings to. The Factory set
contains default camera feature settings. User camera
configuration sets contain features settings previously saved by
the user. (RW)
Select the default camera feature settings saved by the factory.
Select the User Defined Configuration space (UserSet1 to
UserSet8) to save to or load from features settings previously
saved by the user.
Loads the camera configuration set specified by the User Set
Selector feature, to the camera and makes it active. (W)
Saves the current camera configuration to the user set specified
by the User Set Selector feature. The user sets are located on
the camera in non-volatile memory. (W)
Return the status of the device Built-In Self test. Possible return
values are device-specific: refer to Appendix C: Error and
Warning Messages.
Displays the device temperature in degrees Celsius
Gets the current device temperature and refreshes the
DeviceTemperature value.
Displays the device power input voltage.
Gets the current device input voltage and refreshes the
deviceInputVoltage value.
Displays the current status LED state.
Camera status OK.
Camera is currently powerering-up or busy.
Camera built-in self-test failure.
License key for CCI feature upgrade.
Standard
& View
Beginner
Beginner
Beginner
Beginner
Beginner
Beginner
Beginner
Beginner
Beginner
Beginner
Beginner
DFNC
Beginner
Beginner
DFNC
Beginner
DFNC
Beginner
DFNC
Beginner
DFNC
Beginner
DFNC
Guru
Linea CL Series Camera