Table of Contents
Advertisement
User Setting
The command User Set Save saves the current settings to non-volatile memory as a User Set.
The camera automatically restores the last saved user settings when it powers up.
To restore the last saved user settings, select the User Set parameter you want to restore and
then select the User Set Load parameter.
Factory Settings
The factory setting is the camera settings that were shipped with the camera and which loaded
during the camera's first power-up. To load or restore the original factory settings, at any time,
select the Factory Setting parameter and then select the User Set Load parameter.
Note: By default, the user settings are set to the factory settings.
Related ASCII Commands
usd
user set default
usl
user set load
uss
user set save
Linea CL Series Camera
Camera Operation 45
Advertisement
Table of Contents
