Teledyne Linea CL LA-CM-08K08A User Manual page 80

SSB: Set Sensor Blacklevel
Display
Offset
Name
Mnemonic SSB
Argument(s) Offset
Description Set contrast offset – single value added to all pixels after PRNU/flat field
coefficients (before gain).
Notes 
SSF: Set Sensor Framerate
Display Internal Line Rate
Name
Mnemonic SSF
Argument(s) Line rate
Description Set internal line rate in Hz
Notes For 2k, 4k 8k models:
SSG: Set Sensor Gain
Display Gain
Name
Mnemonic SSG
Argument(s) Gain
Description Use the system gain to adjust the camera output to achieve the desired
response. The system gain range is from 1x to 10x.
Notes To enter a floating point number prefix it with a "F" – for example "ssg 0
f1.5"
STM: Set Trigger Mode
Display External Trigger
Name
Mnemonic STM
Argument(s) Mode
Description Set trigger mode
Notes 


78  Appendix B: ASCII Commands
8-bit
12-bit
Range changes depending on pixel format (SPF)
300 to 80, 000 [Hz], 2k, 4k, and 8k models
300 to 48, 000 [Hz], 16k model
Line time > ( Exposure time + 1, 000 ns )
For 16k models: Line time > ( Exposure time + 2, 000 ns )
<0:System> f<gain>
In internal mode line rate is controlled by SSF command
In external mode readout starts on falling edge of CC1 signal and is
available only when STM = 1 (external trigger on)
Exposure time equals high time of EXSYNC on signal on CC1
-32 to 31
-512 to 511
0. Internal
1. External
Linea CL Series Camera