Teledyne Linea CL LA-CM-08K08A User Manual page 65

Width Width
Height Height
Multiple AOI Mode multipleAOIMode
Off
Active
AOI Count multipleAOICount
AOI Selector multipleAOISelector
AOI Offset X multipleAOIOffsetX
AOI Width multipleAOIWidth
Linea CL Series Camera
Width of the Image provided by the device (in pixels).
Height of the Image provided by the device (in lines).
Enable the Multiple AOI (Area of Interest) per image
feature. The AOI Count is set by the Multiple AOI Count
feature.
Off Single AOI per image.
Active The AOI per image feature is active.
Specifies the number of AOIs (Area of Interest) available
for the X axis.
Select an AOI (Area of Interest) when Multiple AOI Mode is
enabled. Selector range is from 1 to the MultipleAOICount
value.
Horizontal offset (in pixels) from the origin to the selected
AOI (Area of Interest). The offset is set as a multiple of 8
or 10 (deca mode) + 1. The maximum offset is the image
width – 40.
Width of the selected AOI (Area of Interest) provided by
the device (in pixels). The minimum region width is 40
pixels and must be a multiple of 8 or 10 (deca mode).
Appendix A: GenICam Commands  63
Beginner
Beginner
DFNC
Expert
DFNC
Expert
DFNC
Expert
DFNC
Expert
DFNC
Expert