Advertisement
5.3.10 Indoor temperature display
● This function can be set via the wired controller by setting the
parameter C05 "whether indoor ambient temperature is
displayed".
● Press any button on the screen to return to the previous
page.
5.3.11 Functions of the main/secondary wired controller
● When two wired controllers control one indoor unit at the
same time (2-to-1 system), one controller will be the Master,
and the other will be the Slave.
● The main wired controller rather than the secondary wired
controller allows you to set the timer and IDU parameters.
Auto
Fan
No permission
Auto
Set
Temp
Humidity
Cool
Dry
Fan
Heat
Self
Clean
Hold
self clean
29
Hold
recheck
M
AU-heat
OFF/ON
Later OFF/ON
Hold
Cancel
Sterilize
Comfor air
Auto Swing
SYS. Diag
adjust
Advertisement
