Sinclair SDV 6 SWC-61 User & Installation Manual page 30

5.3.8 Sterilize mode
It only works with an IDU containing a sterilization module.
Enabling sterilization mode:
Holding both
for 3 seconds
Disabling sterilization mode:
Holding both
for 3 seconds
On the engineering setting page, you can enable or
disable sterilization feature.
Parameter N42 on the engineering setting page
allows you to set the sterilization module.
It works only with the IDU provided with sterilization
feature.
Sterilize
Sterilize
INFORMATION
i
27