Advertisement
4.2.2 Installlation of bottom cap of the wired controller
Screw hole
installed on 86
Electrician box,
use two Philips
head screw,
M4×25
When installed on 86 Electrician box:
Adjust the lengths of the two plastic support bars in the
accessory package. Ensure that the bottom cap of the wired
controller stays level with the wall when installed on the screw
post of electrical box.
Screw post of
the electrical
box
Use a cutting tool to
adjust the lengths of the
two plastic support bars
11
Screw hole
installed on
the wall Use
three round
head screw
ST4X20 and
plastic
expansion
pipe
Advertisement
