Related Manuals for Sinclair SDV KJR-12B
Summary of Contents for Sinclair SDV KJR-12B
- Page 1 FULL DC INVERTER SYSTEMS OWNER'S MANUAL WIRED CONTROLLER KJR-12B C O M M E R C I A L A I R C O N D I T I O N E R S S D V 4 AIR CONDITIONING...
- Page 2 Original instructions...
- Page 4 ● This manual gives detailed description of the precautions that should be brought to your attention during operation. ● In order to ensure correct service of the wired controller please read this manual carefully before using the unit. ● For convenience of future reference, keep this manual after reading it.
-
Page 5: Table Of Contents
CONTENTS 1. SAFETY PRECAUTION................1 2. SUMMARIZE....................2 3. FUNCTION SUMMARY................2 4. NAME AND FUNCTION OF INDICATORS ON THE WIRE CONTROLLER.................... 3 5. INSTALLATION METHOD................4 6. NAME AND OPERATION OF THE BUTTON ON THE WIRE CONTROL- LER......................5 7. -
Page 6: Safety Precaution
1. SAFETY PRECAUTIONS The following contents are stated on the product and the operation manual, including usage, precautions against personal harm and property loss, and the methods of using the product correctly and safely. After fully understanding the following contents (identifiers and icons), read the text body and observe the following rules. -
Page 7: Summarize
Warning Please entrust the distributor or professionals to install the unit. The installers must have the relevant know-how. Delegate Improper installation performed by the user without perm installation W W arning arning ission may cause fire, electric,shock, personal injury or water leakage. -
Page 8: Controller
4. NAME AND FUCTION OF INDICATORS ON THE CONTROLLER Operation mode indication Follow me function ON/OFF indication Fan speed indication Lock Timer ON/OFF Temperature display zone ① Operation mode indication: When adjust setting off time or only off When press " MODE " button, the follow- time is set , the "OFF"... -
Page 9: Installation Method
the same as setting temperature. It is speed. available under cooling, heating, auto ⑥ Lock: mode. When the " LOCK " button is pressed, ④ ON/OFF indication : the icon appear and other buttons is When is on, the icon display, unable, press again, the icon disappear. -
Page 10: Name And Operation Of The Button On The Wire Controller
When a wire controller is needed, a small 5-way terminal should be added,fix an infrared emitter with gumwater near the receiver on the switch board. Connect its anode and cathode to A and B,and +5V, GND, RUN to C, D, E on the switch board. 6. - Page 11 ⑤ Electrical heater button : ① Mode botton: If press this button in heat mode, electri- When press this botton,the operation cal heater function become ineffective. mode change following ⑥ Reset button(hidden): sequence: →AUTO → COOL→DRY→HEAT→FAN Use a 1mm stick to press in the little hole , then the current setting is canceled .
-
Page 12: Using Method
⑩ Swing button: 7. USING METHOD First press, start swing function;second press, stop swing. (Match to some AUTOMATIC OPERATION model with swing function). Connect to power,indoor operation lamp Economy operation button: flash. press this button, the indoor unit 1. Press "MODE" button, select " AUTO operates in economy mode, press again, "... -
Page 13: Dry Operation
3. Press "FAN SPEED" button to select 2. Press " timer " on button repeatedly to high/mid/low/auto. adjust time setting. 4. Press "ON/OFF" button, indoor unit 3. If press this button and hold on, the operation lamp on, it works in selected time will increase at 0.5h, after 10h, it mode. -
Page 14: Change Timer
3. Timer off time must be longer than 8. TECHNICAL INDICA- timer on time. TION AND REQUIRE- 4. 0.5 second after setting, the wire MENT controller send information.the setting is finished. EMC and EMI comply with the CE certification requirements. CHANGE TIMER If there is a need of changing timer time, press corresponding button... - Page 15 Waste Acts of respective country, in the Czech Republic in Act no. 185/2001 Coll., in the wording of later regulations. In case of incorrect disposal of this waste, a fine can be imposed according to national regulations. Manufacturer: Sinclair Corporation Ltd. 1-4 Argyll Street London W1F 7LD United Kingdom Supplier and technical support: Nepa, spol.s.r.o.