Operating Guide | VLT® HVAC Drive FC 102
9.9 Enclosure Airflow
Illustration 66:
Airflow for E1h/E2h (Left) and E3h/E4h (Right)
Illustration 67:
Airflow Using Back-wall Cooling Kits on E1h/E2h (Left) and E3h/E4h (Right)
9.10 Fastener Torque Ratings
Apply the correct torque when tightening fasteners in the locations that are listed in
fastening an electrical connection results in a bad electrical connection. To ensure correct torque, use a torque wrench.
156 | Danfoss A/S © 2020.01
225 mm (8.9 in)
225 mm (8.9 in)
225 mm (8.9 in)
225 mm (8.9 in)
table
48. Too low or too high torque when
AQ275556502253en-000101 / 130R0706
Specifications