Finishing The Outdoor Unit Installation; To Finish The Outdoor Unit Installation - Daikin Altherma 3 R MT F Series Installer's Reference Manual

10 Finishing the outdoor unit installation

10.1 To finish the outdoor unit installation

ERRA08~12E + ELVZ12S18+23E
Daikin Altherma 3 R MT F
4P708478-1 – 2023.05
NOTICE
It is recommended that the refrigerant piping between indoor and outdoor unit is
installed in a ducting or the refrigerant piping is wrapped with finishing tape.
INFORMATION
For the requirements of the refrigerant piping insulation, see
piping insulation" [
1 Insulate and fix the refrigerant piping and cables as follows:
d c
a
b
g
a Gas pipe
b Gas pipe insulation
c Interconnection cable
d Field wiring (if applicable)
e Liquid pipe
f Liquid pipe insulation
g Finishing tape
2 Install the service cover.
10 Finishing the outdoor unit installation
|
4
83].
e
f
"8.1.2 Refrigerant
Installer reference guide
141