Daikin Altherma 3 R MT F Series Installer's Reference Manual page 205

ERRA08~12E + ELVZ12S18+23E
Daikin Altherma 3 R MT F
4P708478-1 – 2023.05
# Code
[5.C] [0-0E]
[0-0D]
[0-0C]
[0-0B]
Margin
In domestic hot water operation, the following hysteresis value can be set for the
heat pump operation:
# Code
[5.D] [6-01]
Example: setpoint (T )>maximum heat pump temperature–[6‑01] (T
U
Description
WD curve:
Note: There are 2 methods to set the weather
dependent curve. See "11.5.2 2-points
4
curve" [ 164] and "11.5.3 Slope-offset
4
curve" [ 165] for more information about the
different curve types. Both curve types require 4
field settings to be configured according to the
figure below.
T
DHW
[0-0C]
[0-0B]
T
a
[0-0E] [0-0D]
▪ T : The desired tank temperature.
DHW
▪ T : The (averaged)
a
temperature
▪ [0-0E]: low outdoor ambient temperature: –
40°C~5°C
▪ [0-0D]: high outdoor ambient temperature:
10°C~25°C
▪ [0-0C]: desired tank temperature when the
outdoor temperature equals or drops below
the low ambient temperature: 45°C~[6‑0E]°C
▪ [0-0B]: desired tank temperature when the
outdoor temperature equals or rises above the
high ambient temperature: 35°C~[6‑0E]°C
Description
The temperature difference determining the heat
pump OFF temperature.
Range: 0°C~10°C
11 Configuration
|
outdoor ambient
–[6‑01])
HP MAX
Installer reference guide
205