Table of Contents
Advertisement
Spectral PC 400Z IP65
DMX Address
In this menu you can set the DMX starting address of the device.
Press the UP/DOWN buttons to select the DMX starting address of the device. The selection range
depends on the active DMX channel mode:
●
HSIC (9 CH):
●
SSP (9 CH):
●
TOUR (12 CH):
●
TR16 (17 CH):
Press the ENTER button to save the changes.
Auto Programs
In this menu you can select a built-in auto program or a custom program. There are 10 built-in auto
programs, which cannot be edited, and 10 custom programs, which can be edited in the Edit menu. For
more information see 6.6.7. Edit on pages 25–26.
01) Press the UP/DOWN buttons to choose an auto program or a custom program.
02) Press the ENTER button to confirm your choice. If you have chosen one of the auto programs, after
pressing the ENTER button you can additionally adjust the speed.
03) Press the UP/DOWN buttons to set the program speed. The adjustment range is between 0–255, from
slow to fast.
04) Press the ENTER button to set the speed.
Note:
You cannot adjust the speed of the custom programs.
Run Mode
In this menu you can set the control mode of the device.
01) Press the UP/DOWN buttons to select one of the following 2 options:
●
DMX:
●
SLAVE:
02) Press the ENTER button to confirm the selection.
Zoom Mode
In this menu you can select the zoom speed.
01) Press the UP/DOWN buttons to select one of the following 2 options:
●
MODE 1:
●
MODE 2:
02) Press the ENTER button to confirm the selection.
Product code: 43554
001–504
001–504
001–501
001–496
The device will operate in DMX mode
The device will operate as a slave device in master/slave mode
Fast zoom speed (default setting). Use this setting when T
Slow zoom speed. Use this setting when T
< 0 °C
a
24
> 0 °C
a
Advertisement
Table of Contents
