Related Manuals for SHOWTEC Cameleon Spot 7 Q6 V1
Summary of Contents for SHOWTEC Cameleon Spot 7 Q6 V1
- Page 1 USER MANUAL ENGLISH Cameleon Spot 7 Q6 Product code: 42665 Highlite International B.V. – Vestastraat 2 – 6468 EX – Kerkrade – the Netherlands...
- Page 2 Cameleon Spot 7 Q6 Preface Thank you for purchasing this Showtec product. The purpose of this user manual is to provide instructions for the correct and safe use of this product. Keep the user manual for future reference as it is an integral part of the product. The user manual shall be stored at an easily accessible location.
-
Page 3: Table Of Contents
Cameleon Spot 7 Q6 Table of contents Introduction ................................4 Before Using the Product ..........................4 Intended Use ............................... 4 Product Lifespan ..............................4 LEDs Lifespan ............................... 4 Text Conventions ..............................5 Symbols and Signal Words ..........................5 Symbols on the Information Label ........................5 Safety .................................. - Page 4 Cameleon Spot 7 Q6 Curves Select ............................29 Dimmer Speed ............................29 Display Invert ............................30 PWM Frequency ..........................30 DMX Fail ..............................30 Backlight Time .............................31 Lock ...............................31 Key Backlight ............................31 Factory ..............................32 Information ..............................32 DMX Channels ..............................33 6 Channels, 8 Channels, 13 Channels ....................33 6.8.
-
Page 5: Introduction
After unpacking, check the contents of the box. If any parts are missing or damaged, contact your Highlite International dealer. Your shipment includes: ● Showtec Cameleon Spot 7 Q6 ● Schuko to Power Pro True cable (1,5 m) ● Quick-lock bracket ●... -
Page 6: Text Conventions
Cameleon Spot 7 Q6 Text Conventions Throughout the user manual the following text conventions are used: ● Buttons: All buttons are in bold lettering, for example “Press the UP/DOWN buttons” ● References: References to chapters and parts of the device are in bold lettering, for example: “Refer to 2. -
Page 7: Safety
Cameleon Spot 7 Q6 Safety Important Read and follow the instructions in this user manual before installing, operating or servicing this product. The manufacturer will not accept liability for any resulting damages caused by the non-observance of this manual. Warnings and Safety Instructions DANGER Danger for children For adult use only. - Page 8 Cameleon Spot 7 Q6 WARNING Risk of epileptic shock Strobe lighting can trigger seizures in photosensitive epilepsy. Sensitive persons should avoid looking at strobe lights. CAUTION Possible eye damage caused by high light intensity Possibly hazardous optical radiation emitted from this device. Do not look at the operating light source.
-
Page 9: Requirements For The User
Cameleon Spot 7 Q6 This device is designed to be used as a professional outdoor wall washer. Any incorrect use may lead to hazardous situations and result in injuries and material damage. ● This device is not suitable for households and for general lighting. ●... -
Page 10: Description Of The Device
Description of the Device The Showtec Cameleon Spot 7 Q6 Tour is a compact 7x 12 Watt RGBWA-UV LED spot with IP65 rating, suitable for indoor and outdoor applications. It is small enough to position inside a square truss as an up/down light, has a fixed 15°... -
Page 11: Back View
Cameleon Spot 7 Q6 Back View Fig. 03 IP65 3-pin XLR connector IN 100–240 V Power Pro True power connector IN OLED display + control buttons 100–240 V Power Pro True power connector OUT 10) IP65 3-pin XLR connector OUT 11) Protective valve 12) Safety eye Product code: 42665... -
Page 12: Product Specifications
Maximum housing temperature t 70 °C Minimum distance: Minimum distance from flammable surfaces: Minimum distance to lighted object: 0,5 m Optional Accessories You can additionally purchase the following accessories: Product code: 44002 (Showtec UR-5 Universal IR Remote) Product code: 42665... -
Page 13: Dimensions
Cameleon Spot 7 Q6 Dimensions Fig. 04 Product code: 42665... -
Page 14: Installation
Cameleon Spot 7 Q6 Installation Safety Instructions for Installation WARNING Incorrect installation can cause serious injuries and damage of property. If trussing systems are used, installation must be carried out only by instructed or skilled persons. Follow all applicable European, national and local safety regulations concerning rigging and trussing. Personal Protective Equipment During installation and rigging wear personal protective equipment in compliance with the national and site-specific regulations. -
Page 15: Rigging
Cameleon Spot 7 Q6 Rigging The device can be positioned on a flat surface (see Fig. 05) or mounted to a truss or other rigging structure in any orientation. Make sure that all loads are within the pre-determined limits of the supporting structure. -
Page 16: Angle Adjustment
Cameleon Spot 7 Q6 Angle Adjustment You can adjust the angle of the device with the 2 adjustment screws (01). Turn the adjustment screws (01) counterclockwise to release it. 02) Tilt the device at the desired angle (see Fig. 07). 03) Turn the adjustment screws (01) clockwise to tighten it. -
Page 17: Connecting To Power Supply
Cameleon Spot 7 Q6 Connecting to Power Supply DANGER Electric shock caused by short-circuit The device accepts AC mains power at 100–240 V and 50/60 Hz. Do not supply power at any other voltage or frequency to the device. This device falls under IEC protection class I. Make sure that the device is always electrically connected to the ground (earth). -
Page 18: Setup
Cameleon Spot 7 Q6 Setup Warnings and Precautions DANGER Electric shock caused by short-circuit This device is IP65 rated. ● Do not expose the device to conditions that exceed the rated IP class conditions. ● Keep the connectors sealed with the rubber caps when the connectors are not in use. ●... -
Page 19: Dmx Cables
Cameleon Spot 7 Q6 DMX Cables Shielded twisted-pair cables with 3-pin XLR connectors must be used for reliable DMX connection. You can purchase DMX cables directly from your Highlite International dealer or make your own cables. If you use XLR audio cables for DMX data transmission, this may lead to signal degradation and unreliable operation of the DMX network. -
Page 20: Dmx Linking
Cameleon Spot 7 Q6 DMX Linking To connect multiple devices on one DMX data link, follow the steps below: 01) Use a 3-pin DMX cable to connect the DMX OUT connector of the lighting controller to the DMX IN connector of the first device. 02) Connect the first device’s DMX OUT connector to the second device’s DMX IN connector with a 3-pin DMX cable. -
Page 21: Operation
Cameleon Spot 7 Q6 Operation Safety Instructions for Operation Attention This device must be used only for the purposes it is designed for. This device is intended for professional use as an outdoor wall washer. It is not suitable for households and for general lighting. -
Page 22: Control Panel
Cameleon Spot 7 Q6 Control Panel A) OLED display DOWN button C) UP button D) SET button MODE button Fig. 11 ● Use the MODE button to exit the current submenu and to return to the Main Menu. ● Use the UP/DOWN buttons to navigate through the menus or to increase/decrease numeric values. ●... -
Page 23: Menu Overview
Cameleon Spot 7 Q6 Menu Overview Product code: 42665... - Page 24 Cameleon Spot 7 Q6 Product code: 42665...
-
Page 25: Main Menu Options
Cameleon Spot 7 Q6 Main Menu Options Upon start-up, the display shows the current software version and the temperature. The main menu has the following options: ● Touch the UP/DOWN buttons to navigate through the main menu. ● Touch the SET button to open the submenus. Note: By default the display is locked. -
Page 26: Address
Cameleon Spot 7 Q6 Address In this menu you can set the desired DMX starting address. 01) Touch the UP/DOWN buttons to set the desired DMX address. The adjustment range is 001–512. 02) Touch the SET button to confirm. Channels In this menu you can set the desired DMX channel mode. -
Page 27: Auto
Cameleon Spot 7 Q6 Auto In this menu you can set Auto mode. 01) While in the main menu, touch the UP/DOWN buttons to select AUTO. 02) Touch the SET button to enter the menu. The display shows: 03) Touch the UP/DOWN buttons to select YES (to start the auto show) or NO (to return to the previous screen. -
Page 28: Programs 02-16
Cameleon Spot 7 Q6 Program 01 01) If you select program 01, the display shows: Touch the UP/DOWN buttons to select one of the 2 options: ● COLOR ● STROBE Touch the SET button to enter the desired menu. If you select COLOR, touch the UP/DOWN buttons to select one of the 33 color macros. Touch the SET button to save your settings. -
Page 29: Settings
Cameleon Spot 7 Q6 Settings In this menu you can adjust the settings of the device. 01) While in the main menu, touch the UP/DOWN buttons to select SETTINGS. 02) Touch the SET button to enter the menu. The display shows: 03) Touch the UP/DOWN buttons to select one of the 9 submenus: ●... -
Page 30: Curves Select
Cameleon Spot 7 Q6 Curves Select In this menu you can set the dimming curves. 01) Touch the UP/DOWN buttons to select one of the 4 dimming curves. 02) Touch the SET button to confirm. Dimmer Speed In this menu you can set the dimmer speed. 01) Touch the UP/DOWN buttons to select FAST or SMOOTH. -
Page 31: Display Invert
Cameleon Spot 7 Q6 Display Invert In this menu you can set the orientation of the display. 01) Touch the UP/DOWN buttons to select one of the 2 options: ● NORMAL Normal orientation of the OLED display ● INVERT The OLED display is rotated by 180° 02) Touch the SET button to confirm. -
Page 32: Backlight Time
Cameleon Spot 7 Q6 Backlight Time In this menu you can select whether the backlight of the display remains on or set the time for the display to turn off after inactivity. 01) Touch the UP/DOWN buttons to select one of the 5 options: ●... -
Page 33: Factory
Cameleon Spot 7 Q6 Factory In this menu you can restore the default factory settings. 01) Touch the UP/DOWN buttons to select YES or NO. 02) Touch the SET button to confirm. Information In this menu you can view the current software version, temperature, total lifetime and the UID (RDM code of the device). -
Page 34: Dmx Channels
Cameleon Spot 7 Q6 DMX Channels 6 Channels, 8 Channels, 13 Channels 6 CH 8 CH 13 CH Function Value Setting Master Dimmer 000–255 From low to high intensity (0–100 %) 000–010 No function Linear Strobe 011–255 From low to high frequency (0–20 Hz) 000–010 No function Pulse Strobe... - Page 35 Cameleon Spot 7 Q6 6 CH 8 CH 13 CH Function Value Setting 176–191 Color fade 3 192–207 Color fade 4 208–223 Color fade 5 224–239 Color fade 6 240–255 Color fade 7 Program Speed 000–255 Speed adjustment, from slow to fast 000–255 From low to high intensity (0–100 %) Green...
-
Page 36: Rdm Information
RDM Information This device supports RDM. Refer to 6.8.2. Supported RDM PIDs (Parameter IDs) for more information. 6.8.1. RDM Details ● Responder: 29B4:0CFxxxxx ● Manufacturer's ID: Showtec (Highlite International B.V.) ● Manufacturer Label: Showtec ● Model Description: Cameleon Spot 7Q6 ●... -
Page 37: Remote Control
Cameleon Spot 7 Q6 Remote Control The device can be controlled with an IR remote control (44002). DANGER Do not ingest battery, chemical burn hazard The remote control contains a coin cell battery. If the coin cell battery is swallowed, it can cause severe internal burns in just 2 hours and can lead to death. - Page 38 Cameleon Spot 7 Q6 To operate the device with the IR remote control, point the remote control to the infrared sensor (05). Note: The remote control will work only if the device is already operating in Auto, Built-in Programs or Manual mode.
-
Page 39: Auto
Cameleon Spot 7 Q6 Button Function Description Activates Red LEDs Green Activates Green LEDs Blue Activates Blue LEDs Amber Activates Amber LEDs White Activates White LEDs Activates UV LEDs Color 22 (purple) Activates color 22 (R 160; G 000; B 255; W 000) Color 23 (purple/pink) Activates color 23 (R 255;... -
Page 40: Program Speed
Cameleon Spot 7 Q6 Program Speed Press the button to set the program speed. Press the buttons to increase/decrease the program speed. The adjustment range is 1– 100, from slow to fast. Note: If you select program 1 and start adjusting the program speed, the device automatically switches to program 2. -
Page 41: Troubleshooting
Cameleon Spot 7 Q6 Troubleshooting This troubleshooting guide contains solutions to problems which can be carried out by an ordinary person. The device does not contain user-serviceable parts. Unauthorized modifications to the device will render the warranty void. Such modifications may result in injuries and material damage. -
Page 42: Maintenance
Cameleon Spot 7 Q6 Maintenance Safety Instructions for Maintenance DANGER Electric shock caused by dangerous voltage inside Disconnect power supply before servicing or cleaning. Preventive Maintenance Attention Before each use, examine the device visually for any defects. Make sure that: ●... -
Page 43: Draining Condensation Water
Cameleon Spot 7 Q6 Draining Condensation Water The Cameleon Spot 7 Q6 is IP65 rated. The device can resist water jets. If the device is exposed to extreme humid conditions during servicing, condensation may collect inside the device. This can happen also during transportation, if the device is exposed to extreme temperature variations. -
Page 44: Deinstallation, Transportation And Storage
Cameleon Spot 7 Q6 Deinstallation, Transportation and Storage Instructions for Deinstallation WARNING Incorrect deinstallation can cause serious injuries and damage of property. ● Let the device cool down before dismounting. ● Disconnect power supply before deinstallation. ● Always observe the national and site-specific regulations during deinstallation and derigging of the device. - Page 45 Cameleon Spot 7 Q6 Product code: 42665...
- Page 46 Cameleon Spot 7 Q6 Product code: 42665...
- Page 47 Cameleon Spot 7 Q6 Product code: 42665...
- Page 48 ©2023 Showtec...