Program 01; Programs 02-16; Master/Slave Mode - SHOWTEC Helix M1000 Q4 Mobile Manual

Helix M1000 Q4 Mobile

4.1. Program 01

01) If you have chosen program 01, the display will show:
02) Press the UP/DOWN buttons to choose one of the 2 options:
● COLOR
● STROBE
03) Press the SET button to enter the desired menu.
04) If you have chosen COLOR, press the UP/DOWN buttons to choose one of the 33 color macros. Press
the SET button to save your settings.
05) If you have chosen STROBE, press the UP/DOWN buttons to set the strobe frequency. The adjustment
range is between 0–99, from OFF to high frequency. Press the SET button to save your settings.

4.2. Programs 02-16

01) If you have chosen one of the programs 02–16, the display will show:
02) Press the UP/DOWN buttons to choose one of the 2 options:
● SPEED
● STROBE
03) Press the SET button to enter the desired menu.
04) If you have chosen SPEED, press the UP/DOWN buttons to set the built-in program's speed. The
adjustment range is between 1–100, from slow to fast. Press the SET button to save your settings.
05) If you have chosen STROBE, press the UP/DOWN buttons to set the strobe frequency. The adjustment
range is between 0–99, from OFF to high frequency. Press the SET button to save your settings.

5. Master/Slave Mode

With this menu you can set the device as a slave.
01) While in the main menu, press the UP/DOWN buttons to choose SLAVE.
02) Press the SET button to enter the menu. The display will show:
03) Press the UP/DOWN buttons to choose YES or NO.
04) Press the SET button to confirm your choice.
05) If you have chosen YES, the device will be set as a slave and will react the same as the master
device.
Ordercode: 43740 27