ExRobotics ExR-2 Operating Manual page 68

connecting
the docking
station to a
power supply
Quick charger
cable could
break if robot
is driven
away when
it's
connected
People could Docking station
injure weighs 35kg.
themselves
carrying the
docking
station to its
deployment
location
Robot system Robot and
could create docking station
a spark that are IECEx and
would ignite ATEX certified
an explosive for Zone 1
atmosphere potentially
explosive gas
atmospheres.
On-site Robot uses
tampering special
compromises fasteners to
robot's Ex restrict access
safety to its critical
parts.
Mechanical Parts are
parts fail and extensively
compromise tested during Ex
robot's Ex certification.
safety
ExRobotics B.V.
ExR-2 Robot
Operating Guide
This document is considered an uncontrolled copy when printed. Always ensure that you print and use a current version.
Copyright 2023 ExRobotics B.V.
Control software
prevents the
robot from
driving when the
quick charger is
connected.
Document No.: Owner:
20220412IP1
Version No.: 3 Ian Peerless
docking station
to the power
supply & that
they follow the
procedures in
the ExR-2
Operating
Instructions.
Quick charger
only to be
connected in
safe locations
with
temperatures
less than 45°C.
Transport the
docking station
on a trolley/van
as far as
possible. No less
than 2 people to
lift it.
Customer to
comply with the
ExR-2 Operating
Instructions &
Ex parameters
on robot's label.
Customer to
ensure no-one
tampers with
the robot.
Customer to
inform
ExRobotics if
any parts are
damaged & to
Date:
2023-07-25
Page 67 of 69