Table of Contents
Advertisement
9.5.4. Changing the SIM Card
▪
Remove the status indicator board from its slot.
▪ Press the front of the existing SIM card to release it from the holder.
▪ Insert the new SIM card into the holder, ensuring correct orientation.
9.5.5. Reassembling the Device
▪ Re-install the status indicator board, aligning its pins carefully (see pictures below).
ExRobotics B.V.
ExR-2 Robot
Operating Guide
This document is considered an uncontrolled copy when printed. Always ensure that you print and use a current version.
Copyright 2023 ExRobotics B.V.
Document No.:
Owner:
20220412IP1
Version No.: 3
Ian Peerless
Date:
Page 43 of 69
2023-07-25
Advertisement
Table of Contents
Need help?
Do you have a question about the ExR-2 and is the answer not in the manual?