ExRobotics ExR-2 Operating Manual page 66

Robot could
drive over an
edge and fall
on a person
or equipment
Robot could Robot navigates
roll over 35 degree
ExRobotics B.V.
ExR-2 Robot
Operating Guide
This document is considered an uncontrolled copy when printed. Always ensure that you print and use a current version.
Copyright 2023 ExRobotics B.V.
Collision
avoidance
software cannot
be relied upon to
detect drop-offs
& ramps.
Document No.: Owner:
20220412IP1
Version No.: 3 Ian Peerless
personnel that
might drive
vehicles or
equipment into
robots.
If robot collides
with an object
(& especially if
there's a risk of
damage to the
Dome PTZ) it
should be
inspected for
damage
(possibly using
remote
cameras) before
recommencing
missions in
potentially
explosive
locations.
Robot drivers
should be
trained to
inspect the area
around the
robot with the
panning
inspection
module before
starting to drive
or performing
sharp turns
Customer to
assess robot
routes for drop-
offs/steep
slopes & take
precautions if
necessary.
Keep well away
if possible. If
Date:
2023-07-25
Page 65 of 69