Cloud Software; Fleet Management & Fleet Status - ExRobotics ExR-2 Operating Manual

6. Cloud Software

Robots are operated and data is collected using the "cloud". Access is granted as described in
Section 8.2. Six types of screens are available as described below. The software is continuously
being upgraded particularly:
▪ As each screen is progressively migrated from User Interface Version 1 (UI-v1) to Version 2
(UI-v2)
▪ Additional skills are added.
The latest upgrades will be documented in the Energy Robotics' support portal (Reference 6).
6.1. Fleet Management & Fleet Status
Fleet Management is the first screen that appears when users log on. It allows them to connect to
any robot to which they've been granted access. Scrolling down reveals more robots.
The Fleet Status screen (see below) is accessed by clicking on the "navigation menu" icon to the top
left of the Fleet Management screen. When connected to a specific robot this menu also allows:
▪ A User to navigate between the different screens.
▪ Users to access "Site Config". This is used to add a location name adjacent to the robot's
serial number on the screen headers. It can also be used to enter E-Mail addresses to which
robot status notifications will be sent.
▪ Engineers to enable "Maintenance Mode". This option is used when a robot is taken off-site.
It prevents users from accessing and controlling the robot.
ExRobotics B.V.
ExR-2 Robot
Operating Guide
This document is considered an uncontrolled copy when printed. Always ensure that you print and use a current version.
Copyright 2023 ExRobotics B.V.
Document No.: Owner:
20220412IP1
Version No.: 3 Ian Peerless
Date:
Page 12 of 69
2023-07-25