Fault Rectification; Fault Finding; Repairing; Dismounting - Datcon DT9000 N Operating Instructions Manual

Process indicator

Table of Contents

DT9000 N

20180614-V0

8. Fault rectification

The instrument has a sophisticated self-test function. It is

able to detect and display the majority of the errors.

All the error messages are described in detail in chapters

10.3 and 10.4 of the Appendix.

In the case of an error that causes total inability of the

instrument to function, nothing appears on the display.

In accordance with Point 2.1.: For safety and warranty

reasons, any internal work on the instrument must be

carried out by DATCON personnel.

In the case of errors, it is recommended to notice of the

displayed error message, as well as of the phenomenon

seen.

These information please communicate to the Datcon

service personnel.

The steps described in Chapter 4. Mounting should be

performed in reverse sequence. Upon dismounting the

instrument, observing all the safety rules is mandatory, like

upon mounting.

Only qualified and authorised professionals may perform

the dismounting operations.

According with the concerning EU directive, the

Manufacturer undertakes the disposal of the instrument that

are manufactured by it and intended to be destroyed.

Please deliver it in contamination-free condition to the site

of the Manufacturer or to a specialised recycling company.

Table of Contents