Benchmarking; Development Environment; Iar Embedded Workbench Settings - Renesas RL78 Series Application Note
Vde certified self test library
Hide thumbs
Also See for RL78 Series:
- User manual (1879 pages) ,
- Manual (88 pages) ,
- Application note (25 pages)
Table of Contents
Advertisement
RL78 Family
4 Benchmarking
4.1
Development Environment
•
IECUBE - QB-RL78G13-ZZZ-EE
•
QB-R5F100LE-TB
•
Tool chain:
MCU:
Internal Clock:
External Sub Clock:
4.2
IAR Embedded Workbench Settings
The following show the specific options and setting set for the test harness project. The graphics only show those
options and settings that have been changed. All others are the default project settings set by the IAR Embedded
Workbench.
4.2.1
General Options
R01AN0749EG0201 Rev.2.01
Mar 04, 2014
Full RL78/G13 In circuit Emulator
RL78/G13 Target Board 64pin LQFP (10 x 10mm)
IAR Embedded Workbench Version 1.20.1
R5F100LE (64KB Flash, 4KB RAM 64pin)
32 MHz High Speed Oscillator
System Clock = 32 MHz
32 KHz
Figure 10 IAR EW General Options - Target Device
VDE Certified IEC60730/60335 Self Test Library
Page 31 of 50
Advertisement
Table of Contents
