Figure 26: Build Project Options (See Toolbar); Figure 27: Dut Connection Manager View (For Swd); Figure 28: Download Stack/Cola Application (See Toolbar); Figure 29: Open Hostapp Tool (See Toolbar) - Renesas DA14AVDDECTDEVKT User Manual

UM-D-005
DA14AVDDECTDEVKT Quick Start Guide
7. Click on "DUT Connection Manager" and click on "SWD" to connect to J-Link Lite debugger
(Figure 27).

Figure 27: DUT Connection Manager View (for SWD)

8. Now download Stack and COLA application to the target DUT

Figure 28: Download Stack/Cola Application (See Toolbar)

9. If you are using the carrier boards outside of EU region, change the DECT region accordingly by
using the HostApp tool (see
10. Now, Cola is disabled by default. In order to enable it, connect to the HID Interface by clicking on
"DUT Connection Manager" tab and then click on "HID". (See

Figure 30: DUT Connection Manager View (for HID)

User Manual
CFR0012

Figure 26: Build Project Options (See Toolbar)

Figure 29). See section 4.1.

Figure 29: Open HostApp Tool (See Toolbar)

Revision 1.2
19 of 22
(Figure 28).
Figure 30).
18-Jan-2021
© 2022 Renesas Electronics