Nikon D70 Manual page 214

Self-timer
Depth-of-fi eld preview
Monitor
Video output
External interface
Tripod socket
Firmware upgrades
Power source
Dimensions (W × H × D)
Weight
Operating environment
Temperature
Humidity
• Unless otherwise stated, all fi gures are for a camera with a fully-charged battery
op er at ing at an ambient temperature of 20 °C (68 °F).
• Nikon reserves the right to change the specifi cations of the hardware and software
described this manual at any time and without prior notice. Nikon will not be held
liable for damages that may result from any mistakes that this manual may con tain.
204
Electronically controlled timer with 2 – 20 s duration
When CPU lens is attached, lens aperture can be stopped
down to value selected by user (A and M modes) or value
selected by camera (Digital Vari-Program, P, and S modes)
1.8˝, 130,000-dot, low-temperature polysilicon TFT LCD with
brightness adjustment
Can be selected from NTSC and PAL
USB 2.0 full speed
¼˝ (ISO)
Firmware can be upgraded by user
• One rechargeable Nikon EN-EL3 Li-ion battery; charging
voltage (MH-18 quick charger or optional MH-19 multi
charger): 7.4 V DC
• Three CR2 lithium batteries (with MS-D70 battery holder)
• EH-5 AC adapter (available separately)
Approximately 140 × 111 × 78 mm (5.5˝ × 4.4˝ × 3.1˝)
Approximately 595 g (1 lb 5 oz) without battery, memory
card, body cap, or monitor cover
0 – 40 °C (32 – 104 °F)
Less than 85% (no condensation)