Custom Setting 25: Remote
This option controls how long the camera will
continue to wait for a signal from the remote
control when no operations are performed in
delayed remote or quick-response remote modes:
1 minute (the default option), 5 minutes, 10 min-
utes, or 15 minutes. If no signal is received in the
speciﬁ ed period or the camera is turned off, the
camera will revert to single-frame or continuous
mode (whichever was last in effect).
Highlight Remote in the detailed CSM menu (
selector to the right. Press the multi selector up or down to highlight an op-
tion, then press to the right to make a selection.
135) and press the multi