Csm Menu; Date; Lcd Brightness - Nikon D70 Manual

CSM Menu

To choose whether the CSM menu lists all twenty-
six Custom Settings or only the fi rst ten options,
highlight CSM menu in the setup menu (
and press the multi selector to the right. Press the
multi selector up or down to highlight an option,
then press to the right to make a selection.
Option
CSM menu contains only items listed below. Changes can not be made
to other Custom Settings while this option is in effect.
• R: Menu reset
Simple
• 3: AF-area mode
(default)
• 6: No CF card?
• 9: EV step
Detailed CSM menu lists all twenty-six options (R–25).

Date

To set the camera clock to the current date and
time, highlight Date in the setup menu (
and press the multi selector to the right. See
"First Steps: Basic Setup" Step 4 for details (
16). The Date menu is displayed automatically
the fi rst time the camera is turned on.

LCD Brightness

To adjust monitor brightness, highlight LCD
brightness in the setup menu (
the multi selector to the right. The menu shown
at right will be displayed. Press the multi selector
up to increase brightness, down to decrease. The
num ber at the bottom of the dis play indicates the
cur rent bright ness level, with +2 the brightest set-
ting and –2 the darkest. Press the multi selector to the right to complete the
operation and return to the set up menu.
155)
Description
• 1: Beep
• 4: AF assist
• 7: Image review
155)
155) and press
CSM menu
Simple OK
Detailed
• 2: Autofocus
• 5: ISO auto
• 8: Grid display
Date
Set OK
Y M D
2004 01 01
H M S
00 00 00
LCD brightness
0 OK
161