A Note on Electronically-Controlled Cam er as
In extremely rare in stanc es, un usu al char ac ters may ap pear in the control panel and the
cam era may stop func tion ing. In most cas es, this phe nom e non is caused by a strong
ex ter nal stat ic charge. Turn the cam era off, re move and replace the battery, and turn
the cam era on again, or, if you are using an AC adapt er (available sep a rate ly), dis-
con nect and re con nect the adapt er and turn the cam era
on again. If the problem persists, press the reset switch
(see right) and then reset the camera clock to the correct
date and time (
func tion, con tact your re tail er or Nikon rep re sen ta tive.
Note that dis con nect ing the power source as de scribed
above may result in loss of any data not re cord ed to the
memory card at the time the prob lem occurred. Data
already recorded to the card will not be affected.
• Error accessing memory
• Unable to create new
• Card has not been for-
matted for use in D70.
• Memory card contains no
• Current folder is empty.
All photos in current folder
File has been created or
modiﬁ ed using a com put er
or different make of cam-
era, or ﬁ le is corrupt.
16). In the event of con tin ued mal-
• Use Nikon-approved card.
• Check that contacts are
clean. If card is dam aged,
contact retailer or Nikon
rep re sen ta tive.
• Delete ﬁ les or insert new
• Format memory card.
• Insert another card.
• Set Playback ﬂ dr to All.
Set Playback ﬂ dr to All or
use Hide im age to reveal