Nikon D70 Manual page 119

4
Aim the transmitter on the ML-L3 at the in-
frared receiver on the camera and press the
shutter-release button on the ML-L3 (when
using the remote outdoors, make sure that
the line of site between the transmitter and
the infrared receiver is not blocked by the lens
or other obstacles). How the camera focuses
and shoots depends on the option selected for
Custom Setting 2 (Autofocus;
Shooting
mode
Once camera has focused, self-
timer lamp will blink for 2 s before
shutter is released. If unable to fo-
Delayed
cus, camera will return to standby
remote
without releasing shutter.
Shutter is released immediately
after camera focuses. Self-timer
lamp will fl ash when shooting
Quick-
is complete. If unable to focus,
response
camera will return to standby
remote
without releasing shutter.
The camera will not adjust focus in manual focus mode or if autofocus
has been set using the shutter-release button on the camera.
To return to single-frame or continuous shooting mode, turn the camera
off or rotate the mode dial to another setting. The shooting mode in effect
before remote control mode was selected will also be restored if no opera-
tions are performed for the time selected for Custom Setting 25 (Remote;
154). The default setting is one minute.
AF-S (Single-servo AF)
139).
Custom Setting 2
AF-C (Continuous-servo AF)
Self-timer lamp blinks for 2 s be-
fore shutter is released. Camera
does not focus.
Camera releases shutter immedi-
ately without focusing. Self-timer
lamp will fl ash when shooting is
complete.
Infrared receiver
Approx. 5 m (16´)
109