Using the Built-in Speedlight
Follow these steps when using the built-in Speedlight with a CPU lens.
Rotate the mode dial to the desired setting
proceed to Step 4 (
Flash for Digital SLR will be selected, and the
built-in Speedlight will pop-up automatically
Choose a metering method. In P, S, and A
modes, the metering method determines the
type of ﬂ ash control used (
or center-weighted metering to activate i-TTL
Balanced Fill-Flash for Digital SLR. Standard i-
TTL Flash for Digital SLR is activated automati-
cally in mode M and when spot metering is
selected in modes P, S, and A.
will pop up and begin charging. When the
Speedlight is fully charged, the ﬂ ash-ready
indicator will light.
Auto Flash (
The built-in Speedlight can not be raised and ﬁ red manually in
modes. Once raised, the built-in Speedlight will only ﬁ re when required for additional
Some lenses may block the red-eye reduction lamp, preventing the subject from seeing
the lamp and interfering with red-eye reduction.
When the Speedlight Is Not in Use
To save battery power when the Speedlight is not in use, return it to the closed position
by pressing it lightly downward until the latch clicks into place.
mode is selected,
98). i-TTL Balanced Fill-
94); select matrix
button. The built-in Speedlight