EWM T5.00-AC/DC Comfort 3.0 Operating Instructions Manual page 68

Functional characteristics
Machine configuration menu
Display
1 for AC welding machines only.
2 For machines with filler wire (AW) only.
only for machines with an interface for automated welding or appropriate automation components.
3
68
Setting/selection
Welding current actual value display > see 4.2 chapter
------- Actual value display
------- Nominal value display
Pulsed TIG welding (thermal)
------- Function enabled (ex works)
------- For special applications only
Filler wire welding, operating mode
------- Filler wire operation for automated applications,
wire is fed when current flows
------- Non-latched operating mode (ex works)
------- 3rd cycle operating mode
------- Latched operating mode
TIG antistick > see 5.1.10 chapter
------- function active (factory setting).
------- function inactive.
Average value controller (AC)
------- Function enabled (factory setting)
------- Function disabled
activArc voltage measuring
------- Function enabled (ex works)
------- Function disabled
Fast take-over of control voltage (automation)
------- Function enabled
------- Function disabled (ex works)
Welding procedure DC+ (TIG)
Protection against an accidental selection of polarity DC+ and the associated destruction
of the tungsten electrode (factory setting).
------- Polarity switching to DC+ is possible.
------- Polarity switching is disabled (factory setting).
Gas monitoring
Depending on where the gas sensor is situated, the use of a pilot static tube and the
welding process monitoring phase.
------- Function disabled (ex works).
------- Monitoring during the welding process. Gas sensor between gas valve and
welding torch (with pilot static tube).
------- Monitoring prior to the welding process. Gas sensor between gas valve and
welding torch (without pilot static tube).
------- Permanent monitoring Gas sensor between gas cylinder and gas valve (with
pilot static tube).
Arc detection for welding helmets (TIG)
Modulated waviness for better arc detection
------- Function disabled
------- Medium intensity
------- High intensity
2
1
3
1
099-00T500-EW501
30.1.2023