Table of Contents
Advertisement
Figure 43. Installing the drive backplane
Next steps
1. Connect the drive backplane cables to the backplane, signal and power cables on the system board.
Figure 44. Cabling diagram
Table 64. 4 x 2.5-inch backplane cable connections
Order
1
2
From
MB-SL6_CPU2_PA3 (signal connector
on system board)
MB-SIG_PWR_1 (system board power
connector)
To
BP-BP_DST_PA1 (backplane signal
connector )
BP-BP_PWR_1 (backplane power
connector)
Installing and removing system components
83
Advertisement
Table of Contents
