Table of Contents
Advertisement
13.
Remove the GPU cold
Steps
1. Here is the orientation image for removal and installation sequence of liquid cooling tubes for processor, PSB cold plate, GPU
cold plates.
Figure 279. removal and installation sequence of liquid cooling tubes for processor, PSB cold plate, GPU cold
plates
2. If you want replace just the GPU module, using Torx 15, release four screws securing GPU module on GPU socket.
NOTE:
All GPU cold plates are not required to remove for replacing just one GPU.
3. Lift and remove the GPU module from the GPU socket.
NOTE:
The procedure to remove the all the GPUs is same.
Figure 280. Removing the GPU module
plate.
Installing and removing system components
249
Advertisement
Table of Contents
