Table of Contents
Advertisement
Figure 184. Installing the CBB cold plate module
4. Using the Phillips 2 screwdriver, remove the screws from the CBB handles. Lift the handles away from the CBB cold plate
module.
Figure 185. Removing the CBB handles
5. Pull the plunger and rotate the metallic gate . Plug the cold plate tubes numbering with 1 and 6 to the Manifold Liquid
cooling.
Next steps
1.
Slide in the system board
2. Reconnect the liquid cooling tubes 11 and 12 from the Manifold for DLC module.
tray.
Installing and removing system components
189
Advertisement
Table of Contents
