Service Menu, Local Gpio; Assigning An Input To Activate A Key Group - Telex KP-812 User Manual

Service Menu, Local GPIO

Use this menu item to assign the GPIO inputs and outputs. Inputs can be assigned to activate
intercom keys (including group master keys and a solo key). Outputs can be activated by
intercom keys. Set up inputs and outputs as follows:
Assigning an Input to Activate a Key
1.
2.
3.
4.
5.
6.
7.
8.
9.

Assigning an Input to Activate a Key Group

1.
2.
3.
4.
5.
6.
7.
8.
9.
50
Select Local GPIO, then tap the encoder knob.
Input displays.
Tap the encoder knob.
GPI Inp #1 displays.
Turn the encoder knob to display different GPI Input .
Tap the encoder knob to select a GPI Input.
Turn the encoder knob to display Talk Key .
Tap the encoder knob.
Tap Key displays
Tap the intercom key that you want to assign. This is the key that will activate when
the GPI Input activates.
Hold the encoder knob for 1 second to exit , or tap the encoder knob twice to back
up and make more assignments.
Run Service Menu, Save Cfg to store local GPIO settings.
Select Local GPIO, then tap the encoder knob.
Input displays.
Tap the encoder knob.
GPI Inp #1 displays.
Turn the encoder knob to display different GPI Input .
Tap the encoder knob to select a GPI Input.
Turn the encoder knob to select Group.
Tap the encoder knob.
By default, Group 1 displays. Turn the encoder knob to select a different group.
Tap the intercom key that you want to assign. This is the key that will activate when
the GPI Input activates.
Hold the encoder knob for second to exit , or tap the encoder knob twice to back
up and make more assignments.
Run Service Menu, Save Cfg to store local GPIO settings.
KP-812 Keypanels User Manual