Advertisement
OPERATION (CONT)
USING THE
SIDETONE ADJUSTMENT
STAGE ANNOUNCE FEATURE
Sidetone refers to that portion of the director's
1. Connect the rear panel STAGE ANNOUNCE
own voice signal which is heard in the director's
output to the PA system.
headset. The amount of sidetone is adjustable for
2. Set the CALL/MIC switch to ON.
each channel through small openings i n the top
cover (labeled SIDETONE A through SIDETONE
3. Press and hold the STAGE ANNOUNCE
D). Adjustment may be made using a small, flat-
button while speaking into the microphone.
blade screwdriver.
SERVICE INFORMATION
FACTORY SERVICE
All Audiocom equipment returns must be sent
prepaid. Telex will not accept collect shipments.
The following information must accompany all
equipment returned for repair:
IN-WARRANTY RETURNS:
All equipment repaired in-warranty by Telex will
be returned prepaid by Telex.
If requested, an estimate will be sent before
repairing non-warranty equipment. This is a
guaranteed estimate -final charges will not
exceed what is quoted. If payment is sent along
with your estimate approval, COD charges will be
avoided; otherwise, equipment will be returned to
you COD.
1. Your name, address and telephone number.
FACTORY SERVICE ADDRESS:
2. Purchaser's name and address (if different
from above).
3. Copy of proof of purchase (keep your original).
Service Department
Telex Communications, Inc.
1720 East 14th Street
Glencoe, Minnesota 55336 U.S.A.
4. Model and serial numbers (or date codes).
5. A complete description of the problem.
CUSTOMER ASSISTANCE
NON-WARRANTY RETURNS:
Customer Service Department
1. Your name, address and telephone number.
Telex Communications, Inc.
9600 Aldrich Avenue South
2. Model and serial numbers (or date codes).
Minneapolis, Minnesota 55420 U.S.A.
Telephone: (61 2) 884-4051
3. A complete description of the problem.
(Collect calls not accepted)
Advertisement
