Intercom Keys And Displays - Telex KP-812 User Manual

Intercom Keys and Displays

Alphanumeric Display Indications for Intercom Keys
Upper Case Letters : Upper case letters indicate keys that have any kind of talk assignment, with or
without a corresponding listen assignment. Example, DIR1.
Lower Case Letters : Lower case letters indicate keys that have only a listen assignment. Example,
dir1.
Dashes ---- : Dashes indicate a key that has no talk or listen assignment.
Note: The flashing alphanumeric display for the TIF keys, remote IFB keys, and remote ISO keys can
be disabled by placing a check mark next to "Don't generate tallies for TIF and trunk use" in AZedit
(Options menu, Intercom Configuration, Options tab).
LED Indications for Intercom Keys
Note: For the Japanese model KP-812 keypanel, the talk ON LED will appear red and the Listen ON
LED will appear green.
Talk LED Indications
Each button is back lit with a Bi-colorLED as an indicator. The talk LED is the button below the display
panel. The talk LED indications are as follows:
Continuous Red
Talk is on and the keypanel operator can be heard at the destination.
Continuous Green Talk LED & Flashing Display Alpha ("in-use")
The key is off, but someone is talking to the destination. This indication is provided for any local PL,
IFB, ISO, or TIF key. It does not apply to remote IFB or ISO keys. This indication is provided so
keypanel operators know when critical director communications are occurring. If you activate the key,
either of two things will happen:
•
If you activate the key and the talk LED turns continuous red, this indicates you and the other
keypanel operator are both talk to the destination.
•
IFB keys only: If the talk LED flashes green when an IFB key is activated, this indicates the
other keypanel has a higher IFB priority and you cannot talk at this time.
Note: The green "in-use" indication for TIF keys can be disabled in AZedit. In the AZedit Options
menu, select Intercom Configuration, then click on the Options tab. Place a check mark next
to "Don't generate tallies for TIF and trunk use". Be sure to send the change to the intercom
system.
Flashing Green Talk LED
You cannot talk at this time. This indication occurs when you activate a local IFB key that is already in
use by a keypanel with a higher IFB priority. It also occurs when you activate any key assigned to a
remote destination, but there are currently no trunks available.
KP-812 Keypanels User Manual 27