Listen Source Selection Led - Telex KP-812 User Manual

Listen Source Selection LED

There are four LED indicators for Listen Source selection. (Default is speaker LED on, rest of them
off).
Internal Speaker
Headset/Handset
Matrix Audio In
Auxilliary 1 In
On power-up MATRIX IN audio is routed to speaker. This is indicated by the following:
Speaker Selected
Speaker
Headset/Handset
MATRIX IN
AUXIN 1
The audio being heard on the speaker
will be changed through the volume
encoder.
If the encoder were pushed once, it would select between Headset/Handset and Speaker volume. If it
is pushed twice from either headset or speaker it will jump to MATRIX IN, if enabled.
Matrix In Selected
Speaker
Headset/Handset
MATRIX IN
AUXIN 1
The above LEDs indicate that
Level of audio being adjusted
through the encoder is not of speaker
but it is of MATRIX IN.
In order to move between MATRIX IN or AUX IN 1, tap the encoder once is required.
AUX IN Selected
Speaker
Headset/Handset
MATRIX IN
AUXIN 1
The above LEDs indicate that
Level of audio being adjusted
through the encoder is not of speaker
but it is of AUX IN 1.
If the encoder is pushed twice it will go back to the previously selected item in table 1.
26
Table
1
Table
2
Handset/Headset Selected
Speaker
Headset/Handset
MATRIX IN
AUXIN1
The audio being heard on headset is from
MATRIX IN. Audio level on headset will
be changed through the volume encoder.
KP-812 Keypanels User Manual