Controls Descriptions - Telex KP-812 User Manual

Controls Descriptions

S LED:
PEAKER
H LED:
EADSET
M IN LED:
ATRIX
A IN LED:
UX
P 4 LED:
AGE
P 3 LED:
AGE
P 2 LED:
AGE
P 1 LED:
AGE
M E :
ENU NCODER
V C :
OLUME ONTROL
M M :
IC UTE
F K :
UNC EY
P U D :
AGE P AND OWN
P M C :
ANEL IC ONNECTOR
P M LED:
ANEL IC
H M LED:
EADSET IC
S N
TANDARD UMERICAL
K :
EYPAD
L :
ISTEN BUTTONS
12
Indicates the user can adjust the Speaker levels.
Indicates the user can adjust the Headset levels.
Indicates the user can adjust the audio levels from the Matrix to the keypanel.
Indicates the user can adjust the audio levels from the Aux In to the keypanel.
When the Page 4 LED is lit, this indicates that setup page four is assigned to the main
panel.
When the Page 3 LED is lit, this indicates that setup page three is assigned to the
main panel.
When the Page 2 LED is lit, this indicates that setup page two is assigned to the main
panel.
When the Page 1 LED is lit, this indicates that setup page one is assigned to the main
panel.
The menu encoder knob turns clockwise and counterclockwise to scroll through menu
options. To select an option, tap the encoder key once. To go back one step, double-
tap the encoder knob. Press and hold for one second to exit.
The volume control knob controls the volume of the selected source or destination
as indicated by the lit LED.
The Mic Mute button mutes whichever microphone is active so no audio can be
transmitted through the microphone.
The Func key is a user assignable key or soft key that can be programmed to perform
an action that is used frequently or is difficult to access, such as a lower level menu
item. It can also be programmed to operate a local GPI output.
The Page Up button changes that active page assigned to the main panel.
Accepts an electret gooseneck microphone, such as the Telex model MCP-90-XX.
The model MCP-90 series panel mic connector is a 1/4" stereo plug, with a threaded
shaft for easy installation.
When the Panel Mic LED is lit green, the Panel Mic is active. This is the default
setting for the KP-812 Keypanel.
When the Headset Mic LED is lit green, the headset mic is active. This automatically
when a headset is plugged in.
Use the Keypad to enter auto dial numbers, as well as dial outside numbers for TIF
operation.
The listen buttons allow the user to listen to audio coming into the keypanel. To listen,
press an upper button. A green LED will light the button.
KP-812 Keypanels User Manual