Table of Contents
Advertisement
Note:
Telephone operations require an optional TIF-2000 Telephone Interface. Also, you must first assign an
intercom key to talk/listen to the TIF. We recommend a talk+auto listen assignment.
Receiving a Phone Call
When there is an incoming telephone call, the talk LED will flash green on the selected key
assigned to the TIF.
Note:
The green flash for incoming TIF call is the default operation. Alternatively, a continuous-
green talk LED indication can be provided. This is accomplished by checking the check box
"Don't generate tallies for TIF or trunk use" in AZedit (Options menu, Intercom Configuration,
Options tab). Note, this check box also affects other tally indications. For further information,
see the AZedit User Manual.
Dialing and Hanging Up Using the KP-812 Keypanel Dialing Menu
The dialing menu will only activate when talking to an intercom port that has the "Port is TIF" check box
activated in AZedit.
Manual Dialing
1. Turn ON the TIF talk key.
Manual Dial displays in the call waiting window.
2. Tap the menu encoder.
Dial#? appears and a dial tone should be audible in your speaker or headset.
Note:
3. Dial the phone number.
Digits appear in the Call Waiting Window as you dial. Dialing tones are audible in the speaker
or headset.
4. If the far end answers, begin your conversation.
Note:
KP-812 Keypanels User Manual
Chapter
Telephone Operation
To hang up at any time after this point, tap the encoder knob. Hang Up will display.
Tap the encoder knob again.
After the far end answers, you may dial additional digits (to retrieve voice mail, log
4
33
Advertisement
Chapters
Table of Contents
