Chapter 3; Basic Operation; Selecting Headset Or Speaker; Listen Volume Adjustments - Telex KP-812 User Manual

Keypanel desktop with handset, desktop, rack mount and level key

Table of Contents

By default, the panel mic is active. When a headset is used via the 4-pin XLR connector on the

keypanel, the Headset Mic LED indicator activates and the headset mic is used.

By default, the Vol. control adjusts the listen volume for the speaker, headset,intercom input, or or

AUX In as indicated by the lit LED. The level of auxiliary program input 1 (if Aux inputs are enabled)

and the level of incoming audio from the intercom matrix can be adjusted. Use the Vol. control to

adjust the listen volume. The Vol. control defaults back to the speaker or headset after about one

minute of inactivity of the control. The minimum volume level for either the keypanel speaker or

headset may be adjusted. See, Service Menu, Min Vol .

Note: You can save the volume adjustments to be the power-up defaults using Service Menu, Save

Cfg .

KP-812 Keypanels User Manual

Chapter

Table of Contents

Chapters

Table of Contents