Menus; Menu, Auto Dial; Menu, Key Option Chime; Removing The Chime Option From A Key - Telex KP-812 User Manual

Menus

Menu, Auto Dial

Use this menu item to store auto dial numbers.
1.
2.
Note: To insert a pause or space at any time, tap * 9 9. For example, you may have to insert
a pause after dialing 9 to get an outside line.
3.
4.
5.

Menu, Key Option Chime

You can add a chime tone to any key for incoming call announcement. The chime tone will activate for
about 5 seconds after a call is received.
1.
2.
3.
4.
Note:

Removing the chime option from a key

Repeat the procedure to add chime, but tap any keys where the LEDs are lit red to turn them off. Run
Save Cfg to store the changes.
KP-812 Keypanels User Manual
Select Auto Dial, then tap the encoder knob.
Phone # displays.
Enter the phone number on the keypad.
The numbers will scroll in the Call Waiting window.
Tap the Encoder knob.
A-Dial #1 displays (store auto dial number 1).
To store a different auto dial number, turn and tap the encoder knob to display and
select the desired auto dial number.
#XX saved displays (where XX=the auto dial number you selected.)
Run Service Menu, Save Cfg to store auto dial numbers.
Select Chime, then tap the encoder knob.
Tap any buttons on the keypanel where you want to add a chime tone.
Hold the encoder knob for 1 second to exit.
Run Service Menu, Save Cfg to store Chime settings.
The chime option will continue on a key even if you change the key assignment.
43